Est 1984



Care Instructions and washing instructions

Laser engraved crab Cutting Board
How do I maintain my cutting board ?”, so we’ve put together this short set of instructions to help you out. Proper Cleaning and Washing Washing the cutting board. Wash your cutting board with soap and warm water and scrub well. The volume of water and mechanical scrubbing is more important than soap in flushing bacteria and other food particles off the board. After washing the cutting board, dry immediately with a towel and let it air dry standing up or on a raised rack with air flow.
DO NOT: Put the board in the dishwasher. The heat and water will warp and splinter the wood AND void warranties from most manufacturers. Only plastic, composite or glass boards can go into the dishwasher.
    Dunk or let the board in stand in water. The wood will absorb water and potentially warp.Use bleach. This will stain the wood and/or excessively dry the wood. Put a wet board flat to dry. If the board dries on one side, it will cause the wood to warp.
If your board has stains or smells , you can use lemon juice or white vinegar directly on the area. The acid in these liquids will neutralize the organic material or fats causing the problem .

Putting oil on cutting board
How to Apply Cutting Board Oil and Board Cream Putting oil on cutting board
Once your cutting board is thoroughly dry, apply the oil directly onto the surface of the board. Be generous with the application, especially if the wood is dry or you just purchased the cutting board or butcher block. You want the surface to be dripping wet on all sides and we recommend using a small bar towel or new paint brush to spread the oil (try not to soak up the oil), as using your hands may lead to accidental splinters. Most importantly, let the oil soak into the cutting board for as long as possible; at least a few hours or overnight if possible